OpenWRT-18.06.2软路由 udp2raw-tunne udpspeeder luci-udptools
- 编译完成的 udp2raw-tunne udpspeeder luci-udptools 安装包下载
- openwrt_udptools.zip
UDP工具 配置图示
# ps | grep -e udp # 可以查看工具运行的参数 udpspeeder -c -l09999 -r127 :21333 -f20:10 --mode 0 --timeout 0 :udp2raw -c -l12721333 -r34 :2999 --raw-mode faketcp -a -k password :# luci-udptools 工具默认: udpspeeder 不用密码,所以VPS服务端 udpspeeder 改成不用密码 # vim /etc/init.d/udptools # 或者编辑 luci-udptools 的脚本 第21行添加 -k $password # vim /etc/config/udptools # UDP工具 参数配置 |
- UDP工具脚本: /etc/init.d/udptools
- UDP参数配置: /etc/config/udptools
OpenWRT 安装 WireGuard, 配置 Udp2Raw + UdpSpeeder + WireGuard 图示
opkg list | grep wireguard opkg install wireguard wireguard-tools luci-i18n-wireguard-zh-cn # 安装中文语言包和常用工具 opkg update opkg install -y luci-i18n-base-zh-cn opkg install -y wget tmux ca-certificates htop opkg install -y wget tmux ca-certificates htop |
- 配置先填wg服务器IP,配置连上了,再改 UDP工具套接到 127.0.0.1
改进后 OpenWRT 安装 WireGuard 防火墙设置
- 在vps上下安装 Nginx 服务器,然后把电脑设置网关IP 为OpenWRT的IP,再使用 http://10.0.0.1 测试。
|
OpenWRT-18.06.2 X64 固件和SDK 下载地址和文件名
- openwrt-18.06.2-x86-64-combined-squashfs.img.gz
- openwrt-sdk-18.06.2-x86-64_gcc-7.3.0_musl.Linux-x86_64.tar.xz
# udp2raw-tunne udpspeeder luci-udptools 编译后ipk包保存位置 openwrt-x64/bin/packages/x86_64/base/luci-udptools_1.0.0-1_all.ipk openwrt-x64/bin/packages/x86_64/base/udpspeeder_20180821.0-1_x86_64.ipk openwrt-x64/bin/packages/x86_64/base/udp2raw-tunnel_20181113.0-1_x86_64.ipk openwrt-x64/bin/targets/x86/64/packages/libpthread_1.1.19-1_x86_64.ipk openwrt-x64/bin/targets/x86/64/packages/libstdcpp_7.3.0-1_x86_64.ipk openwrt-x64/bin/targets/x86/64/packages/librt_1.1.19-1_x86_64.ipk openwrt-x64/bin/targets/x86/64/packages/libatomic_7.3.0-1_x86_64.ipk openwrt-x64/bin/targets/x86/64/packages/libc_1.1.19-1_x86_64.ipk openwrt-x64/bin/targets/x86/64/packages/libgcc_7.3.0-1_x86_64.ipk |
OpenWRT-18.06.2 x86 固件和SDK 下载地址和文件名
- openwrt-18.06.2-x86-generic-combined-squashfs.img.gz
- openwrt-sdk-18.06.2-x86-generic_gcc-7.3.0_musl.Linux-x86_64.tar.xz
# udp2raw-tunne udpspeeder luci-udptools 编译后ipk包保存位置 openwrt-x86/bin/packages/i386_pentium4/base/udp2raw-tunnel_20181113.0-1_i386_pentium4.ipk openwrt-x86/bin/packages/i386_pentium4/base/luci-udptools_1.0.0-1_all.ipk openwrt-x86/bin/packages/i386_pentium4/base/udpspeeder_20180821.0-1_i386_pentium4.ipk openwrt-x86/bin/targets/x86/generic/packages/libc_1.1.19-1_i386_pentium4.ipk openwrt-x86/bin/targets/x86/generic/packages/libpthread_1.1.19-1_i386_pentium4.ipk openwrt-x86/bin/targets/x86/generic/packages/libatomic_7.3.0-1_i386_pentium4.ipk openwrt-x86/bin/targets/x86/generic/packages/libstdcpp_7.3.0-1_i386_pentium4.ipk openwrt-x86/bin/targets/x86/generic/packages/librt_1.1.19-1_i386_pentium4.ipk openwrt-x86/bin/targets/x86/generic/packages/libgcc_7.3.0-1_i386_pentium4.ipk |
如果 opkg update 更新软件源失败,可以添加DNS
# vim /etc/resolv.conf search lan nameserver 127.0.0.1 # 添加临时的DNS,重启后还是会丢失DNS nameserver 8.8.8.8 nameserver 114.114.114.114 # /etc/init.d/dnsmasq restart # 也可以添加DNS到 lan 接口里 |
OpenWRT 安装到U盘里工具和命令
- 下载工具 physdiskwrite.zip
- 使用 [DiskGenius] (http://www.diskgenius.cn/) 把U盘删除所有分区保存
- Windows 中找到 命令提示符 右键管理员权限打开,或者WINPE下的命令窗口操作
physdiskwrite.exe -u openwrt-18.img - -u 参数能够写大U盘和硬盘
- 可以再使用 [DiskGenius] (http://www.diskgenius.cn/) 把剩余的空间分成 windows 支持的U盘分区,平常也可以装点工具
安装 LEDE 或 OpenWRT 剩余磁盘空间,用来做虚拟主机空间
opkg install fdisk # 安装fdisk工具 fdisk -l # 查询磁盘名称和空间 fdisk /dev/sdb # 磁盘分区,选n把剩余空间新建一个主分区 mkfs.ext4 /dev/sdb3 # 格式化第3个主分区 |
-
挂载 /dev/sdb3 分区,当作一个虚拟主机 http://192.168.1.254:88
mkdir -p /usr/upan mount /dev/sdb3 /usr/upan /usr/sbin/uhttpd -f -h /usr/upan -r upan -x /cgi-bin -p 0.0.0.0:88 -p [::]:88 &
- OpenWRT 安装 frpc 客户端,使用内网穿透,就能从外网访问路由器和虚拟主机了.